FMS EdgeFMS Edge — home

Stage 00 · not required

Pre-LOR Requirements and Engagement in Foreign Military Sales

Updated 2 November 2026Checked against the SAMM: 26 October 2026

In the pre-Letter of Request phase, the U.S. Government may help a partner define its requirement before it submits a , though the phase is not required. The , the and the help scope the requirement and plan for the . A partner may also ask for before it submits the .

What happens

The process begins before a partner submits its . In this pre- phase, the United States Government () may help the partner develop its . Pre- work is not required before a partner submits an , and the activities vary with the partner and its circumstances. The (; the U.S. Military Group, or , in some countries) at the U.S. Embassy is the partner's entry point, and it documents and tracks pre- activities [SAMM ].

Pre- work begins when a partner asks for support to address a capability gap or operational requirement. It also begins when a partner identifies a source of funding it expects to have for procurement and asks the to help find an effective use for it. It also begins when the submits a Pre- Assessment Request. Pre- activities end when the receives an , and assessment then begins. In general, official should not be submitted before the partner is able to name the particular defense articles or services it wants to buy [SAMM ].

Defining the requirement

Before submitting an , a partner may ask for help assessing its strategic demand, current capabilities and gaps in operational requirements. The , the relevant and, as appropriate, the relevant Implementing Agencies () can help by providing technical expertise and by facilitating communication with the relevant U.S. agencies. They can also promote alignment with the U.S. strategic objectives and plans set out in the geographic 's Theater and Country Campaign Plans and Strategy, and in the Integrated Country Strategy (ICS) and Mission Resource Requests () of the U.S. Embassy, and work with the partner to align its acquisitions with its budget constraints, national security strategy, military threats, regional environment and mission capability gaps [SAMM ].

Partners may ask the for help in working out which capability options would meet their requirements. For some partners, scoping requirements before the may be critical to submitting an actionable . The should work with the partner, the relevant and the geographic to define the partner's requirements in full. That work may include identifying the quantity, the desired configuration, the maintenance and sustainment package, the desired delivery date, delivery and transportation considerations, training, and the services needed to support the program [SAMM ].

The should also consider whether the requirements fit the partner's operational requirements, budget constraints and strategic objectives. Where a partner asks specifically for before it submits an , the must follow the response guidance in Sections C5.3 and C5.4. Refining these details before the lets the and the help the partner prepare actionable that address its capability gaps efficiently and effectively while keeping them aligned with U.S. foreign policy goals [SAMM ].

The should connect with the appropriate stakeholders so that, working together, they give the partner support tailored to address its requirements effectively. As appropriate, the should also work with the relevant stakeholders to [SAMM ]:

  • Carry out a gap analysis of the partner's capability requirements across doctrine, organization, training, materiel, leadership, personnel, facilities, and policy ()
  • Weigh whether the partner has the political will to use the capabilities, whether the national legal framework allows or limits their use in the role the partner wants, and whether its Ministry of Defense (MoD) and other supporting institutions have the capacity to sustain them
  • Check the roles and capabilities the partner wants against the Country Campaign Plan, and set out how they relate to specific geographic and national-level strategic objectives
  • Check the objectives the partner wants against the ICS and the of the U.S. Embassy

Once the partner has identified the type of defense capability that will meet its requirements and asks for help identifying options, the should ask the relevant or for a detailed assessment of possible materiel or training solutions. and should bear in mind that some solutions may involve more than one . Where a potential solution includes Command, Control, Communications, Computers, Cyber, and Intelligence (C5I) equipment, the , the or both should seek guidance from the C5I team at the . That team sits in the Weapons Directorate of 's Office of International Operations ( (/WPN)) [SAMM ].

Reaching out to the early helps ensure that a future will include the details a needs. When the contacts the , it should include the () Country Portfolio Director () for awareness. The pre- phase has no prescribed timeframes, but should keep the relevant and the aware of discussions and planned milestones. may choose to end pre- discussions on the basis of feasibility assessments [SAMM ].

When an international partner decides to acquire a sophisticated through the program, formal logistics support planning begins when the international partner submits a comprehensive , which, in addition to identifying the desired configuration, identifies the country’s operational requirements, and existing logistics support capabilities. However, before the is submitted, there should be informal meetings and discussions between the international partner, the weapon , the , the office, and, potentially, the contractor or manufacturer. These discussions should address the configuration of the product, delivery methods, and how the item is to be sustained. The planning process for follow-on support programs and sustainment requirements typically continues with the conducting a in the international partner’s country.

The international partner may specify a preferred in the [SAMM ].

As the international partner continues to define requirements, follow-on discussions can expand to include U.S. defense contractors as well as representatives from the and other Department of War (DoW) organizations. These discussions may include such topics as required security agreements, acquisition alternatives, training plans, transportation plans, methods of financing, and concepts of operations and support. U.S. defense strategy plans, concerns for standardization, and interoperability should complement the international partner’s plans and budgets whenever feasible. Follow-on discussions for the more complex sales may even lead to an international agreement or a between the international partner and the U.S. to document the rights and obligations of each party with regard to weapon systems development, production, or transfer.

Technology release and the Pre-LOR Assessment Request

When credible demand signals point to an for sensitive or classified articles, the should discuss with (/WPN) whether to develop a Pre- Assessment Request (). A requires a endorsement and lets and release determinations begin in time [SAMM , ].

The Total Package Approach

The ensures that an purchaser can obtain the support articles and services it needs, including construction of necessary support facilities, to bring equipment into service and sustain it. The also covers what the purchaser needs to operate the equipment responsibly and effectively, in line with the U.S. intent in approving the transfer [SAMM ]. Planning for follow-on support, training and the other elements of continuity should go with the transfer of end items, and the ensures that the items can be operated and maintained in the future [SAMM ].

When a is prepared, the complete sustainability package must be offered to the purchaser. To the best extent possible, it should also be included in estimates and responses to partners for international competitions [SAMM ].

Successful program and case management and international partner satisfaction are generally the results of careful, up-front planning and foresight. Effective planning for an sale involves anticipating not only the requirements for the itself, but also the associated initial and follow-on support articles and services necessary for introduction and sustainment of the system. This philosophy is called the [SAMM ].

Planning for what should be included in the system sale will vary according to the type of . The commodity-specific checklists can be a valuable tool in identifying the myriad of items or services to be considered for a proposed sale. This type of checklist can provide the international partner, the , and the case manager with the questions that need to be considered to ensure all requirements are identified in an and are subsequently incorporated into the case to achieve .

In some instances the may identify, in coordination with the Under Secretary of War for Acquisition and Sustainment's office (OUSW(A&S)), possible co-sustainment options that support regional sustainment of platforms, weapon systems, sub-systems and components. If the and OUSW(A&S) find these options viable, the notifies 's Office of International Operations, Regional Execution Directorate (/REX), so that /REX can begin discussions with the partner. Besides the system itself, the other items to consider in a total package include follow-on support, initial support, ammunition, software, training, technical assistance and intelligence mission data, among others [SAMM ].

Survey teams

Commodity-specific checklists do not always anticipate all the variables during case development for sales, especially for a partner new to or a case that introduces a new capability.

When requested by an international partner, a team can be organized to conduct a survey to review/assess military capabilities in support of () objectives and to help identify and/or clarify the international partner’s requirements. Surveys are conducted in-country and are generally funded by an case. A survey team typically includes a combination of personnel, international partner representatives, and commercial contractors. Though there are various types of survey teams, a is often used to assess facilities and required levels of maintenance and support capabilities as they pertain to a specific program. Looking at in-country facilities early in the process helps ensure the international partner is prepared to receive, operate, and maintain the new capability. Normally the best time to conduct a is prior to writing the case. This helps ensure the has the insight and information it needs up front to develop the most accurate pricing and delivery schedules possible. Information regarding survey teams is contained in C2.4 and C2.F1.

If needed, the may also work with to arrange more extensive and specialized help, such as teams or Expeditionary Requirements Generation Teams () (Section C2.4). Where it applies, such teams can identify capability gaps, for example in upgrading an existing to a newer model or iteration. They can also support planning and requirements discussions, which helps save considerable time in the process. They also help make sure that every and partner stakeholder fully understands all the technical and programmatic issues involved in the anticipated acquisition request, and that the proposed acquisition matches the operational requirement and the budget [SAMM ].

The Director approves , and the deployment of an should result in the submission of an actionable . If no exists yet, the may be performed up front with Administrative funds. The Administrative account must be reimbursed if and when the leads to an [SAMM ].

Though not a substitute for other types of survey teams, an Expeditionary Requirements Generation Team () may be used to augment staffs and . An helps translate international partner capability needs into well-defined requirements for high-quality and [SAMM , ]. organizes and deploys an on a request, in coordination with the , the appropriate , DoW agencies and other interagency stakeholders [SAMM ].

Key players at this stage

Partner nation

  • Foreign Liaison Officer (FLO)Partner nation military or civilian representative stationed in the United States, often at a U.S. Implementing Agency (AFSAC, USASAC, NAVSUP WSS, or a SYSCOM)

Embassy — Security Cooperation Organization

DSCA

Service international affairs office

Case manager

Program office

Industry

Common pitfalls

  • Partner submits an before requirements are clear, triggering case rework
  • issues identified late: the partner discovers a capability will not be released only after the is in
  • is ignored; partner focuses on end-item cost and is surprised by sustainment pricing

What to watch for

International purchasers and should address transportation capabilities and limitations in their letters of request or memorandums of request for and Building Partner Capacity () , respectively. Commodities that need such planning include sensitive Arms, Ammunition, and Explosives (), classified items, , cryptographic or other sensitive (nonexplosive) items, and oversized major items such as vehicles, aircraft, tanks, helicopters, boats, or heavy construction equipment.

Some of these items can move through a commercial , but Security Risk Category () I items must move by the at least to the overseas unless a waiver is granted [SAMM , ]. Before the , the should work with the partner, the relevant and the geographic to define the partner's requirements, which may include delivery and transportation considerations [SAMM ]. customers and should address the following concerns in pre- discussions in order to plan for delivery of these commodities:

1. Does the customer have the capability to pick up the materiel in the and transport it to their country using their own carrier?

2. If the materiel will move by surface carrier overseas, does the customer have the capability to accept the materiel at the and arrange for movement to the final destination? What if the is in a third country? The customer will be responsible for clearing customs and arranging for transportation through any other country the materiel must transit [SAMM , ].

3. Are there any unique documents, permits, or handling requirements for the shipment to clear customs?

4. What military or commercial air or water ports are available for delivering materiel? What is the carrier capacity of each port? Does the port have secured storage space?

5. Does the customer have the ability to move the materiel securely from the to the final destination?

Guides on this stage

References

SAMM