Army
Foreign Military Sales Case Manager (Army)
USASAC Central Case Manager
The Central Case Manager executes Army cases for assigned countries, from case implementation through case closure. The case manager is responsible for every aspect of the case, tracks delivery status with the , and reconciles the case throughout its life.
What they do
Where Army cases are developed and executed
The Army is decentralized in the preparation and management of Letters of Offer and Acceptance (). involving Army Materiel Command ()-provided materiel and services are managed over their life cycles by Country Program Managers at the U.S. Army Command (). The applicable Life Cycle Management Command () Management Directorate develops the before offers and implements it. The U.S. Army Medical Materiel Agency () managed medical after implementation until the Army discontinued it; its remaining functions passed to the U.S. Army Medical Logistics Command (AMLC). The Training Field Activity () and the U.S. Army Corps of Engineers (USACE) independently develop, implement, and manage for their respective capabilities.
The title of the case manager may differ from one organization to another, such as Command Country Manager, Country Manager, Line Manager, Program Support Manager or Program Manager, but all of these case managers perform case management functions. Case management responsibilities vary with the type of and with the , and they may change as the case moves through its stages, case reconciliation and closure included. The is responsible for keeping the information about the case manager (CM) in the Defense Management System () current [SAMM ].
What a case manager is responsible for
The case manager is accountable for all aspects of assigned cases in compliance with applicable laws and regulations [SAMM , ]. This includes planning and execution functions as well as all financial, logistical, and acquisition matters associated with each program. The objective is to provide all articles and services within the cost and schedule estimated on the [SAMM , ]. The case manager follows the program closely and watches for problems that could affect the estimated cost or schedule. The case manager develops a program master plan that separates the case into management components, indicates significant activities in the execution of the case, and establishes an implementation schedule. A master plan is required for major sales, which include sales that reach the notification thresholds of Section 36(b) of the and proposed sales that would raise the purchaser's current active program by more than fifteen percent. The (/FPRE) or the may also require a plan for other sales. Depending on the size or nature of the case, the plan covers the following: , key milestones (contract status, , delivery schedule, training, contractor support, etc.); status, issues/risk; and key points of contact and responsibilities. The case manager provides the master plan to higher authority and to the international partner to forecast events and track progress. The master plan will be updated and reissued after significant project milestones, prior to Program Management Reviews, and as part of the development of amendments to the case [SAMM ].
The CM is the focal point for activity on the case and manages every aspect of the case. The functions in Table C2.T1 are examples that may be assigned to people at different organizational levels, depending on the complexity and type of case. Not every function applies to every case, and a complex case may include functions the table does not list [SAMM ].
The CM works to achieve the program objectives of the assigned case, keeping to the applicable laws and regulations and working within the organizational structure of its or defense agency. The CM has performed successfully when the case objectives are met. Those objectives are to provide all the articles or services in the case on schedule and within the stated value, and to close the case in a timely manner [SAMM ].
The case manager relies on many others to meet the case objectives. Effective case management depends on frequent communication with the program manager, the , and numerous other key personnel in other organizations. When potential cost overruns or delays are identified, the case manager is expected to consult with the program manager, the contractor, and the international partner to ensure all potential options are explored and informed decisions can be made. Case amendments and modifications should be processed promptly to ensure the case reflects up-to-date estimates and descriptions for the program. After all articles and services have been provided, the case manager ensures that cases are closed in a timely manner.
From implementation to closure
The acts to implement a case once the purchaser has signed it and given the U.S. Government () any required . Before case execution occurs, the case must be implemented in every applicable data system, such as the systems, the Case Performance Reporting Solution (CPRS), and the . The should issue detailed implementing instructions to the activities involved in executing the case. Those instructions must state that implementation depends on receipt of , which the issues [SAMM ].
Case managers, in coordination with the , are responsible for tracking delivery status [SAMM ].
Case management organizations and procedures vary among the Military Departments (). The case manager for blanket order or Supply Support Arrangement () cases normally resides at the applicable . The case manager for defined order cases may be in the or in the weapon . The case manager for training cases resides at the training organization.
The has logistics oversight of all materiel in the . They develop and manage follow-on support cases for maintenance, publications, nonstandard support, and excess materiel. The processes discrepancy reports, resolves transportation problems and processes international partner materiel requisitions. The management team provides information for various types of management reviews, and serves as the focal point for case reconciliation and closure.
The CM is responsible for forwarding in writing, through the appropriate or Defense Agency channel, any matter that endangers the 's ability to keep a commitment it has made to an international partner. The same applies to any matter that has an operational, political or readiness impact on the partner or on a priority case. That written notice alerts the Country Portfolio Director () in the Office of International Operations, Regional Execution Directorate (/REX), as well as the Country Finance Director () in the Financial Policy & Regional Execution Directorate of the Office of Business Operations (/FPRE) [SAMM ].
The purpose of that message is to inform the wider enterprise in advance and to coordinate a unified response to the partner. If the situation also poses an immediate safety risk to the partner's use of delivered defense articles, such as a risk to safety of flight or safety of use, the will instead notify the partner of the risk immediately, without waiting for a fully coordinated response. The sends an information copy to the and and to the appropriate or Defense Agency channel (Section C6.2.3) [SAMM ].
Active case review and reconciliation are critical parts of effective case management, from implementation until the case reaches Supply/Services Complete (). Each case manager must perform an annual case and review or reconciliation on each case. The review compares data between systems, data with performance, with their underlying contracts, and system data with the hardcopy or electronic supporting documents [SAMM ].
Case managers are responsible for timely reconciliation and closure certification, no matter how the work is delegated within the responsible . They should not wait until a case is ready to close before reconciling it. Instead, as materiel is delivered and services are performed, they should reconcile and close out the lines of accounting, requisitions, funding documents and other program documents [SAMM ].
Reconciling and closing cases involves a wide range of organizational responsibilities. Ultimately, the CM in the is responsible for every aspect of the cases in his or her purview, review, reconciliation and closure included. Even so, the purchaser, , the Defense Contract Audit Agency (), the , the Defense Finance and Accounting Service () and various activities within the CM's own are recognized as playing integral roles in overseeing and performing these critical functions [SAMM ].
Active pipeline stages
Where this role is most involved across the FMS pipeline:
Who they work with
The most frequent counterparts across an FMS case:
Guides for this seat
References
SAMM
- SAMM C2.2.1.1
- SAMM C2.2.3: Accountability.
- SAMM C2.2.4: Authority.
- SAMM C2.T1: Case Manager Responsibilities
- SAMM C6.1.1: Routine Case Implementation.
- SAMM C6.2.2
- SAMM C2.2.5
- SAMM C16.1.6.1: Implementing Agency.
- SAMM C9.T2A: Foreign Military Sales Case-Related Manpower Functions and Funding Source Matrix
- SAMM C6: C6 - Foreign Military Sales Case Implementation and Execution
- SAMM C2.2.2: Responsibilities.
- SAMM C2.2.6: Case Reporting and the Master Plan.
- SAMM C16.2.1: Execution Phase Reconciliation.
Public authorities
- DA PAM 12-1: Department of the Army Pamphlet 12-1, Security Assistance Procedures and Operations (31 March 2016)
Facts referenced
- Increase to the FMS purchaser's current active program above which a proposed sale is a major sale needing a program master plan: fifteen percent (as of 11 September 2026; SAMM C2.2.6)
Security Assistance (SA)
A group of programs authorized by federal statutes by which the United States provides defense articles, military training, and other defense-related services by grant, lease, loan, credit, or cash sales in furtherance of national policies and objectives, and those that are funded and authorized through the Department of State to be administered by Department of Defense/Defense Security Cooperation Agency, which are considered part of security cooperation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Cooperation Organization (SCO)
A Department of Defense element that is part of the United States Diplomatic mission located in a foreign country to carry out security assistance and security cooperation management functions under the supervision and coordination authority of the senior defense official/defense attaché.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
AMC: Army Materiel Command
LCMC: Life Cycle Management Command
SATFA: Security Assistance Training Field Activity (SATFA)
SAMM Acronyms, as of 12 September 2026
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DSAMS: Defense Security Assistance Management System
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Assistance Management Systems (DSAMS) →
Arms Export Control Act (AECA)
The basic U.S. law providing the authority and general rules for the conduct of Foreign Military Sales and commercial sales of defense articles, defense services, and training. The Arms Export Control Act (AECA) came into existence with the passage of the Foreign Military Sales Act (FMSA) of 1968. An amendment in the International Security Assistance and AECA of 1976 changed the name of FMSA to the AECA.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
FMS: Foreign Military Sale
SAMM Acronyms, as of 12 September 2026
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Case Description
A short title specifically prepared for each Foreign Military Sales case by the Implementing Agency.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Transportation Plan
A document that details the transportation and security arrangements for moving classified or sensitive material, and identifies individuals responsible for providing security at various points during transportation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Disclosure
The authorized release or transfer of classified or controlled unclassified information (CUI) from the U.S. government to foreign governments, international organizations, or foreign nationals. This process is governed by strict policies and procedures to ensure that the release of information aligns with U.S. national security and foreign policy objectives.
SAMM Glossary, as of 26 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Memorandum of Agreement (MOA)
In the manual's usage, a written agreement between sovereign states, or between a state and an international organization, signed by authorized representatives and legally binding under international law.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
CISMOA: Communications Interoperability and Security Memorandum of Agreement
SAMM Acronyms, as of 12 September 2026
Security Cooperation Information Portal (SCIP)
A web-based tool, managed by the Defense Security Cooperation Agency (DSCA), that gives international purchasers, their agents such as freight forwarders, and authorized U.S. Government personnel information on Foreign Military Sales (FMS) cases and other security cooperation programs.
It covers case, line, requisition and supply data, supply transactions and end-use monitoring information, drawn from the Defense Security Assistance Management System (DSAMS) and the Military Departments' case execution systems.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Military Department (MILDEP)
One of the departments within the DoD created by the National Security Act of 1947, as amended. The Military Departments are: the Department of the Air Force, the Department of the Army, and the Department of the Navy.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Weapon System
A combination of one or more weapons with all related equipment, materials, services, personnel, and means of delivery and deployment (if applicable) required for self-sufficiency.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Contracting Officer
A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The term includes certain authorized representatives of the Contracting Officer acting within the limits of their authority as delegated by the Contracting Officer. A Contracting Officer whose primary responsibility is to enter into contracts is called a procuring contracting officer. One whose primary responsibility is to administer contracts is called an administrative contracting officer. One whose primary responsibility is to terminate contracts and/or settle terminated contracts is called a "termination contracting officer." A single contracting officer may be responsible for duties in any or all of these areas.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Initial Deposit
The payment a Foreign Military Sales (FMS) purchaser sends when it accepts a Letter of Offer and Acceptance (LOA), as full or partial payment for the articles, services or training it has agreed to buy.
Each LOA includes an initial deposit that covers the nonrecurring cost payment and the outlays or deliveries expected before the purchaser's first quarterly payment arrives [SAMM C9.9.1.5.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Integrated Financial System (DIFS)
A financial system providing DoD-level financial management functions for the security assistance (SA) program. This includes centralized Foreign Military Sales (FMS) trust fund accounting, foreign customer billing, and financial management reporting. DIFS consolidates FMS data from the Army, Navy, Air Force, and other implementing agencies, and provides efficient accountability for oversight of the financial and program management aspects of SA.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Cooperative Logistics
The logistics support provided a foreign government/agency through its participation in a U.S. DoD logistics system, with reimbursement paid to the USG for the support provided.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
CLSSA: Cooperative Logistics Supply Support Arrangement
SAMM Acronyms, as of 12 September 2026
Glossary entry →Cooperative Logistics Supply Support Arrangements (CLSSA) →
International Logistics Control Office (ILCO)
The office in each Military Department that manages the logistics support programs and transactions of Foreign Military Sales (FMS) and other security cooperation programs, and the central point in the continental United States for monitoring purchasers' requisitions.
A purchaser reports a valid supply discrepancy to the International Logistics Control Office (ILCO) of the Military Department concerned [SAMM C2.1.5.4.3].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
ILCO: International Logistics Control Office
SAMM Acronyms, as of 12 September 2026
Glossary entry →International Logistics Control Office (ILCO) →
System Program Office
The office of the program manager and the single point of contact with industry, government agencies, and other activities participating in the system acquisition process.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Combatant Command (CCMD)
A unified or specified command with a broad continuing mission under a single commander established and so designated by the President, through the Secretary of Defense and with the advice and assistance of the Chairman of the Joint Chiefs of Staff. Also called CCMD.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Cooperation
Activities by which the Department of War encourages and enables international partners to cooperate with the United States toward strategic objectives, spanning every interaction with foreign defense and security establishments and every security assistance program the Department administers.
Under chapter 16 of Title 10, their purposes are to develop allied and friendly security capabilities for self-defense and multinational operations, to give U.S. forces peacetime and contingency access, and to build relationships promoting specific U.S. security interests [10 U.S.C. 301(7)].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DSCA: Defense Security Cooperation Agency
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Cooperation Agency (DSCA) →
Payment Schedule
List of dollar amounts and when they are due from the foreign customer. The payment schedule is included in the Letter of Offer and Acceptance (LOA) presented to the customer. After acceptance of the LOA, the payment schedule generally serves as the basis for billing to the customer. Changes in the estimated costs of an Foreign Military Sales case may require changes in the accompanying payment schedule.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Contract Management Agency (DCMA)
An agency under the direction of the Under Secretary of Defense for Acquisition and Sustainment, which provides contract administration services for the Department of Defense, other federal organizations and international partners, and is an essential part of the acquisition process from pre-award to sustainment and contract closeout.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C2.2.1.1
“The term "case manager" may differ contingent on the organization, i.e., Country Manager, Command Country Manager, Security Assistance Program Manager, Program Support Manager, Line Manager, etc., but all perform case management functions. Case management responsibilities vary by type of LOA and IA. Case management responsibilities may change as the case evolves through stages, to include case reconciliation and closure. The …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C2.2.2: Responsibilities.
“The CM is the focal point for case activities and manages all aspects of the FMS case. Tasks listed in Table C2.T1. are examples of functions that may be assigned to individuals at various organizational levels depending upon the complexity and type of case. Not all functions are applicable to every case, and complex cases may include functions not listed …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C2.2.3: Accountability.
“The CM works to accomplish the program objectives of the assigned case while adhering to applicable laws and regulations and working within the organizational structure of the Military Department (MILDEP) or defense agency. The CM achieves successful performance when the case objectives are met. These objectives are to: provide all articles or services included in the case on schedule, within …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C2.2.4: Authority.
“FMS cases require concentrated management effort. The CM has a role in each of the major elements of the case: acquisition, programming, logistics, and finance, and is involved in every aspect of planning and executing assigned cases. Effective case management depends on the performance and interaction of many organizations. The CM must have the authority to take action and task …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C2.2.6: Case Reporting and the Master Plan.
“The CM coordinates actions required for successful execution of the case, and uses established channels to convey information to higher authorities, supporting activities, and the purchaser on how the case is progressing. The CM serves as the central point of contact, and acts as the U.S. representative to the FMS customer for questions and problem resolution. To this end, the …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C6.1.1: Routine Case Implementation.
“Case implementation begins when the purchaser accepts the LOA and satisfies applicable initial deposit requirements and continues through completion of required case implementation actions in DSAMS and other applicable systems. Case implementation ends when the case is financially implemented in DSAMS, as reflected by the applicable implementation milestone, unless otherwise authorized under emergency implementation procedures. For management and tracking purposes, …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C6.2.2
“Case managers, in coordination with U.S. Military Groups (MILGPs), are responsible for tracking FMS delivery status.”
Security Assistance Management Manual, as of 26 October 2026
SAMM C2.2.5
“If any situation arises that puts at risk the USG’s ability to meet a commitment made to an international partner or that results in an operational, political, or readiness impact to the international partner or CCMD priority case, the CM is responsible to forward the matter through the appropriate MILDEP/Defense Agency FMS channel to alert the DSCA (Office of International …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C16.2.1: Execution Phase Reconciliation.
“Active case review and reconciliation, extending from Letter of Offer and Acceptance (LOA) implementation until the case is Supply/Services Complete (SSC), are critical components of effective case management. It is mandatory that each case manager (CM) performs an annual case and payment schedule review and/or reconciliation on each case, which includes comparing data between systems, comparing LOA data to performance, …”
Security Assistance Management Manual, as of 28 September 2026
SAMM C16.1.6.1: Implementing Agency.
“Reconciliation and closure of cases involve a wide range of organizational responsibilities. Ultimately, the FMS case manager (CM) in the Implementing Agency (IA) is responsible for all aspects of the case(s) under his/her purview, to include review, reconciliation and closure. However, it is also recognized that various activities within the CM's IA, DSCA, the Defense Finance and Accounting Services (DFAS), …”
Security Assistance Management Manual, as of 11 September 2026