Guide
What happens after a Foreign Military Sales Letter of Request is submitted?
After receiving a the enters it in the Defense Management System as a Customer Request, acknowledges receipt to the purchaser and assesses it against the mandatory actionable criteria. It provides a copy to the and the applicable Military Group if they were not on distribution, and that agency or the Department of State may begin coordination at any point to approve or disapprove the request. Case development on a Category A, B or C document cannot begin until the " Actionable" milestone is entered.
A Letter of Request can be answered three ways. A Rough Order of Magnitude estimate and Price and Availability data commit the U.S. Government to nothing; only the Letter of Offer and Acceptance is the offer, and to buy, the partner must request one.
What happens after a Letter of Request is submitted?
On receipt, the promptly enters the in the Defense Management System () as a Customer Request, at once acknowledges it to the purchaser and assesses it against the mandatory actionable criteria in Table C5.T4A. The criteria include the purchaser's eligibility, whether the article or service may be sold, receipt through proper channels, an identified source of funding and no sanctions that would prevent an offer to the purchaser. The 's first finding that the is actionable or insufficient has a of 10 days for Category A, 10 days for Category B and 45 days for Category C [SAMM , , ]. Categories A, B and C are case development categories of Table C5.T9: Category A covers blanket order cases and , Category B defined order cases, and Category C defined order cases with factors expected to slow their development significantly, with their amendments and, for Categories A and B, their modifications [SAMM ].
Two dates must be entered in promptly when the arrives. The " Date" is the date on the purchaser's request itself. The " Receipt" date is the day the received the , whatever a later validation or assessment finds about whether it is actionable. A Customer Request will be created in for every received. When several documents are developed from one , each gets its own Customer Request, so that can measure accurately how long each document takes to develop [SAMM ].
will forward an to the other concerned when the receiving is not authorized to offer some or all of the items it asks for. For example, if an to the Air Force asks for products such as "S" type devices, which must go on a National Security Agency () , the Air Force will forward the to and ask it to develop a case for those items. then gives the Air Force its , and the Air Force tells the purchaser both case identifiers and how the items are split between the two [SAMM ].
Once an , together with any additional information the purchaser provides, meets the mandatory requirements in Table C5.T4A, it counts as actionable and the may go ahead with case development. For Category A, B and C documents, an " Actionable" milestone must be entered in before case development activities may begin. That milestone is the date on which the assessment has found that the meets at least the mandatory actionable criteria in Table C5.T4A. The case must be initialized before the milestone can be entered in the Case Milestone Window [SAMM ].
The milestone is mandatory for Category A, B and C documents, because it starts their case development clock. An actionable may still need more information before the document can be processed. For an to count as complete, the " Complete" criteria in Table C5.T4B must be fully met as well as those in Table C5.T4A. Before the " Complete" date is entered in , Requests for Information will be sent to the purchaser to settle the remaining issues. If previously provided requirements change significantly, the milestone may be entered again on the same case document, as Section C5.2.5.3 provides [SAMM ].
If the Office of International Operations, (), or the applicable Military Group () was not on distribution for the , the will provide it with a copy. If the is for or , the will also send a copy to the . should begin the activities in Section C5.2.5.1, receipt and acknowledgement, except where they believe the raises concerns on which , the Department of State or both should be asked for guidance [SAMM ].
At any point between the and the , , or both may begin coordination to approve or disapprove the request, or may advise the to suspend further correspondence until that coordination is complete. When the request is disapproved, formally tells the to stop processing it, gives the rationale for the decision and issues guidance on further actions. If a (ID) has already been established in , the will cancel it [SAMM ].
(/WPN) prepares an Advisory and sends it to the Joint Chiefs of Staff and the Under Secretary of War for Acquisition and Sustainment, in the format of Figure C5.F5. The advisory should include a copy of the purchaser's request and, when one is required, the . sends the advisory as soon as possible after it receives the and all the required attachments, to ensure consistency with current Theater objectives and policy [SAMM ].
The recipients of the at the have 10 working days from the advisory's date to send their comments for consideration. In the event of a non-concurrence, will refer the disagreement to an appropriate level in the Under Secretary of War for Policy's office (OUSW(P)) for resolution. The Advisory does not replace any Exception to National Disclosure Policy () process or the releasability requirements the military departments work. Table C5.T6 lists the defense articles and services that need an item-specific advisory or review [SAMM ].
In some instances, may need to prepare an Advisory to notify the Under Secretary of War for Acquisition and Sustainment (USW(A&S)) and the Joint Chiefs of Staff of certain proposed sales. Section C5.2.6 of the describes Advisories and how they are processed. Table C5.T6 of the identifies the types of defense articles requiring either an Advisory or some other type of special review. Each entry in the table provides a hyperlink to either a specific form or to a specific section of the explaining the unique review process for that item. An Advisory does not replace required disclosure or releasability actions being worked by the Military Departments () [SAMM , ].
When an asks for rather than for an , the answers it with a pricing memorandum, except for international competitions and building partner capacity [SAMM ]. A is an initial, non-binding estimate of cost and availability for planning and feasibility, and the will provide it within 30 days on the memorandum template. If the determines that a given before and approval would create a false impression, it gives a negative response instead [SAMM ]. data is prepared for international competitions and Building Partner Capacity. Neither commits the U.S. Government to offer the items [SAMM , ]. responses are not valid for preparing an , and the data compiled for an is called data () [SAMM ].
The , meaning organizations and Defense Agencies, prepare data when a foreign government or international organization (partner) asks for preliminary pricing and availability for an international competition or for building partner capacity. Furnishing data does not commit the U.S. Government () to offer for sale the articles and services it covers [SAMM ].
A is an initial, non-binding cost estimate for planning and assessing feasibility, and it gives the partner a rough sense of what defense articles or services might cost and whether they are available. Furnishing it does not commit the to offer the articles and services for sale. The will reply within 30 days on the memorandum template. and program offices will prepare the first response with the administrative surcharge as its source of funds, in line with the existing manpower policy in Table C9.T2A. An may determine that a response given before and approval is complete would create a false impression under the Department of War directive on disclosing classified military information. In that case the will give a negative response that directs the partner to submit an for an [SAMM ].
References
SAMM
- SAMM C5.2.5.2: Letter of Request Assessment.
- SAMM C5.T4A: Mandatory Criteria Before Letter of Request Actionable (Before Case Development Activities)
- SAMM C5.T9: Case Development Categories and Standards
- SAMM C5.2.5.2.3: Letter of Request Actionable.
- SAMM C5.T6: Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review
- SAMM C5.4: Rough Order of Magnitude Pricing.
- SAMM C5.5.2: Price and Availability Responses.
- SAMM C5.2.5.1: Letter of Request Receipt and Acknowledgement.
- SAMM C5.2.4: Defense Security Cooperation Agency and Department of State Letter of Request Review.
- SAMM C5.2.6.1.1: Preparing Letter of Request Advisories.
- SAMM C5.5.1: Definition.
- SAMM C5.4.1: Definition.
Facts referenced
- LOR Assessment performance standard, Category A (LOR Receipt to the first actionable or insufficient determination): 10 days (as of 26 October 2026; SAMM C5.2.5.2)
- LOR Assessment performance standard, Category B (LOR Receipt to the first actionable or insufficient determination): 10 days (as of 26 October 2026; SAMM C5.2.5.2)
- LOR Assessment performance standard, Category C (LOR Receipt to the first actionable or insufficient determination): 45 days (as of 26 October 2026; SAMM C5.2.5.2)
- Working days for IA comments on an LOR Advisory: 10 working days (as of 11 September 2026; SAMM C5.2)
- Days for the IA to respond to a Rough Order of Magnitude request: 30 days (as of 26 September 2026; SAMM C5.4.1)
Related
Letter of Request (LOR)
The term used to identify a request from an eligible FMS participant country for the purchase of U.S. defense articles and services. The request may be in message or letter format.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Implementing Agency (IA)
The military department or defense agency responsible for the execution of military assistance programs. With respect to FMS, the military department or defense agency assigned responsibility by the Defense Security Cooperation Agency to prepare an LOA and to implement an FMS case. The implementing agency is responsible for the overall management of the actions that will result in delivery of the materials or services set forth in the LOA that was accepted by a foreign country or international organization.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Assistance (SA)
A group of programs authorized by federal statutes by which the United States provides defense articles, military training, and other defense-related services by grant, lease, loan, credit, or cash sales in furtherance of national policies and objectives, and those that are funded and authorized through the Department of State to be administered by Department of Defense/Defense Security Cooperation Agency, which are considered part of security cooperation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Defense Security Cooperation Agency (DSCA)
The Department of War agency that directs, administers and provides guidance to the Department's components and its representatives at U.S. missions for the execution of the security cooperation programs for which it is responsible [SAMM C1.3.2.2]. The agency also provides financial and technical assistance, arranges the transfer of defense materiel, training and services to international partners, and promotes military-to-military contacts.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOR: Letter of Request
SAMM Acronyms, as of 12 September 2026
DSAMS: Defense Security Assistance Management System
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Assistance Management Systems (DSAMS) →
Performance Standard
A specific measure used to evaluate how well an activity or job is done, which includes a threshold to meet established objectives or requirements.
SAMM Glossary, as of 26 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Cooperative Logistics Supply Support Arrangements (CLSSA)
Military logistics support arrangements designed to provide responsive and continuous supply support at the depot level for U.S.-made military materiel possessed by foreign countries and international organizations. The CLSSA is normally the most effective means for providing common repair parts and secondary item support for equipment of U.S. origin that is in allied and friendly country inventories.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Letter of Offer and Acceptance (LOA)
The legal instrument that lists the defense articles and services, including training, that the U.S. Government transfers to a foreign country or international organization, with their estimated costs and the terms and conditions. The benefitting partner does not sign a Building Partner Capacity (BPC) LOA.
The Letter of Offer and Acceptance (LOA) is the instrument the U.S. Government uses to sell under the Arms Export Control Act (AECA); signed LOAs and their later Amendments and Modifications are also called Foreign Military Sales (FMS) cases [SAMM C5.6.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Communications Security (COMSEC)
The measures and controls taken to deny unauthorized persons’ information derived from telecommunications and other information systems, and technologies necessary to ensure the authenticity of such communications. COMSEC includes cryptographic security, transmission security, emissions security, and physical security of COMSEC material. Secure telecommunication or information system cryptographic components are the primary COMSEC products for transmission security and commonly called COMSEC devices or products. COMSEC devices are designated Controlled Cryptographic Items (CCI).
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
LOA: Letter of Offer and Acceptance
SAMM Acronyms, as of 12 September 2026
Case Identifier
A unique six-digit identifier assigned to an Foreign Military Sales case for the purpose of identification, accounting, and data processing of each Letter of Offer and Acceptance. The case identifier consists of the two-letter country code, a one-letter designator for the Implementing Agency, and a three-letter case designator.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
DSCA: Defense Security Cooperation Agency
SAMM Acronyms, as of 12 September 2026
Glossary entry →Defense Security Cooperation Agency (DSCA) →
Significant Military Equipment (SME)
Defense articles for which special export controls are warranted because of the capacity of such articles for substantial military utility or capability. These items are identified on the U.S. Munitions List in the International Traffic in Arms Regulations by an asterisk preceding the item category listing.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Major Defense Equipment (MDE)
Any item of Significant Military Equipment on the U.S. Munitions List having a nonrecurring research and development cost of more than $50 million or a total production cost of more than $200 million. Also defined in section 47 (6), Arms Export Control Act.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Combatant Command (CCMD)
A unified or specified command with a broad continuing mission under a single commander established and so designated by the President, through the Secretary of Defense and with the advice and assistance of the Chairman of the Joint Chiefs of Staff. Also called CCMD.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Country Team Assessment (CTA)
A USG coordinated position of senior U.S. embassy leadership that includes an assessment of a proposed transfer and provides key information necessary for USG evaluation. CTAs can be provided as published cables or dated memos on embassy letterhead and signed by a member of the country team.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Security Cooperation
Activities by which the Department of War encourages and enables international partners to cooperate with the United States toward strategic objectives, spanning every interaction with foreign defense and security establishments and every security assistance program the Department administers.
Under chapter 16 of Title 10, their purposes are to develop allied and friendly security capabilities for self-defense and multinational operations, to give U.S. forces peacetime and contingency access, and to build relationships promoting specific U.S. security interests [10 U.S.C. 301(7)].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Technology Security
The comprehensive framework of policies, practices, and procedures designed to protect U.S. military and dual-use technologies from unauthorized access, transfer, or exploitation by adversaries.
SAMM Glossary, as of 26 October 2026
C4ISR: Command, Control, Communications, Computer, Intelligence, Surveillance and Reconnaissance
SAMM Acronyms, as of 12 September 2026
COMSEC: Communications Security
SAMM Acronyms, as of 12 September 2026
MDE: Major Defense Equipment
SAMM Acronyms, as of 12 September 2026
EWIRDB: Electronic Warfare Integrated Reprogramming Database
SAMM Acronyms, as of 12 September 2026
Technical Data
Recorded information of a scientific or technical nature, regardless of form or characteristic. Examples of technical data packages include research and engineering drawings and associated lists, specifications, standards, process sheets, manuals, technical reports, catalog item identifications, and related information and computer software documentation.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
TDP: Technical Data Package
SAMM Acronyms, as of 12 September 2026
Security Assistance Management Manual (SAMM)
DSCA Manual 5105.38-M required under DoD Directive 5105.65, "Defense Security Cooperation Agency" mandatory for use by all DoD Components. The SAMM provides DoD-wide guidance to the Office of the Secretary of Defense (OSD), the Military Departments (MILDEPs), the Office of the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Combatant Commands, the Defense Agencies, the DoD Field Activities, the Security Cooperation Organizations (SCOs), and all other organizational entities within the DoD engaged in the management or implementation of DoD Security Assistance and Security Cooperation programs over which DSCA has responsibility.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM: Security Assistance Management Manual
SAMM Acronyms, as of 12 September 2026
Glossary entry →Security Assistance Management Manual (SAMM) →
Military Department (MILDEP)
One of the departments within the DoD created by the National Security Act of 1947, as amended. The Military Departments are: the Department of the Air Force, the Department of the Army, and the Department of the Navy.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Price and Availability (P&A)
Preliminary pricing and availability estimates for articles or services that an Implementing Agency (IA) prepares at the request of a foreign government or international organization for an international competition, or of a U.S. Government requesting authority for building partner capacity.
Price and Availability (P&A) responses are estimates of cost and availability, not valid for preparing a Letter of Offer and Acceptance (LOA), and furnishing them does not commit the U.S. Government to offer the articles or services for sale [SAMM C5.5.2, C5.5.1].
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Rough Order of Magnitude (ROM) (Foreign Military Sales)
The Implementing Agencies’ (IAs) response to a Foreign Military Sales Letter of Request for P&A. It is an initial, non-binding cost estimate intended for planning and feasibility assessment, giving the foreign government or international organization (partner) a general idea of the potential cost and availability of defense articles or services. Furnishing this data does not constitute a commitment for the USG to offer for sale the articles and services.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Technology Release
The formal U.S. Government decision processes that seek approval to transfer specific defense items, technical data, or defense services to a foreign partner pursuant to Foreign Military Sales, Direct Commercial Sales, or Cooperative Agreements.
SAMM Glossary, as of 26 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Disclosure
The authorized release or transfer of classified or controlled unclassified information (CUI) from the U.S. government to foreign governments, international organizations, or foreign nationals. This process is governed by strict policies and procedures to ensure that the release of information aligns with U.S. national security and foreign policy objectives.
SAMM Glossary, as of 26 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
P&A: Price and Availability
SAMM Acronyms, as of 12 September 2026
Letter of Offer and Acceptance Data (LOAD)
Data required to develop a Letter of Offer and Acceptance.
SAMM Glossary, as of 12 September 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
Foreign Military Sales (FMS)
The part of U.S. security assistance, authorized by the Arms Export Control Act (AECA), in which eligible foreign governments and international organizations buy defense articles, services and training from the U.S. Government under formal government-to-government agreements.
The articles come either from Department of War stocks or from new procurement under contracts the Department manages [22 U.S.C. 2761, 22 U.S.C. 2762]. A sale is FMS whatever the source of the purchaser's financing.
FMS Edge glossary, as of 10 October 2026
Glossary entry →Open the manual’s entry → (opens in new tab)
SAMM C5.2.5.1: Letter of Request Receipt and Acknowledgement.
“Upon receiving the LOR, the IA promptly enters the LOR data in DSAMS as a Customer Request and immediately acknowledges receipt of the LOR to the FMS purchaser. Both the "LOR Date" (the date included on the actual request from the purchaser) and the "LOR Receipt" date (the date the IA received the LOR, independent of any validation or assessment …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.2.5.2: Letter of Request Assessment.
“The LOR Assessment is the period of time during which the IA determines an LOR’s actionability, as defined in Table C5.T4A. Upon receipt of an LOR, the IA will assess the LOR to determine if the request/requirement submitted by the purchaser meets the actionable criteria as defined in Table C5.T4A. The LOR Assessment period begins immediately upon receipt of the …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.T4A: Mandatory Criteria Before Letter of Request Actionable (Before Case Development Activities)
“Table C5.T4A. Mandatory Criteria Before Letter of Request Actionable (Before Case Development Activities) # Criteria 1 Potential purchaser is an eligible FMS recipient. See Section C4.1. 2 The defense article or defense service sought may be sold. See Section C4.4. and Section C4.5. 3 The request was submitted and received through proper channels. See Section C5.2.2. 4 No sanctions exist …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.T9: Case Development Categories and Standards
“Table C5.T9. Case Development Categories and Standards Category Description Standard Clock Start Clock Stop A Blanket order LOAs (including blanket order training); Cooperative Logistics Supply Support Arrangements (CLSSAs), and associated Amendments and Modifications. Note: Modifications for cases that were originally prepared as Category C documents will be prepared using Category A or B standards. 85% within 30 days Letter of …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.2.5.2.3: Letter of Request Actionable.
“Once an LOR, to include any additional information provided by the purchaser, meets the mandatory requirements found on Table C5.T4A., it is considered actionable and the IA may proceed with case development actions. An "LOR Actionable" milestone must be entered into DSAMS before case development activities may begin for Category A, B, and C documents. The "LOR Actionable" milestone is …”
Security Assistance Management Manual, as of 26 October 2026
SAMM C5.2.4: Defense Security Cooperation Agency and Department of State Letter of Request Review.
“The IA will provide a copy of the LOR to DSCA (IOPS) and the applicable MILGP if one or both were not on distribution and, if the LOR is SME/MDE, to the CCMD. IAs should begin performing the activities identified in Section C5.2.5.1. unless they believe the LOR raises concerns that should be addressed to DSCA and/or State for guidance. …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.2.6.1.1: Preparing Letter of Request Advisories.
“DSCA (IOPS/WPN) prepares and sends an LOR Advisory to the Joint Chiefs of Staff and USW(A&S) using the format in Figure C5.F5. The LOR Advisory should include a copy of the purchaser’s request as well as the CTA (when required). To ensure consistency with existing Theater Security Cooperation objectives and technology security policy, DSCA sends the LOR Advisory as soon …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.T6: Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review
“Table C5.T6. Defense Articles or Services that Require Item-specific Letter of Request Advisories or Review Item Requirement Notes Air-to-surface (A/S) munitions greater than or equal to 105mm in diameter, ship-to-shore munitions, indirect fire S/S munitions, and the associated A/S and S/S delivery systems. Standard Advisory Letter Form (See Figure C5.F5B.) Unique review (See Section C4.4.18.) Ballistic Missile Defense Capability Standard …”
Security Assistance Management Manual, as of 5 October 2026
SAMM C5.4: Rough Order of Magnitude Pricing.
“Rough Order of Magnitude (ROM) Pricing Memorandum is prepared by the Implementing Agencies (IAs) (Military Department organizations and Defense Agencies) in response to LORs for P&A, except in instances of international competitions or building partner capacity (BPC).”
Security Assistance Management Manual, as of 11 September 2026
SAMM C5.4.1: Definition.
“A ROM is an initial, non-binding cost estimate intended for planning and feasibility assessment, giving the foreign government or international organization (partner) a general idea of the potential cost and availability of defense articles or services. Furnishing this data does not constitute a commitment for the USG to offer for sale the articles and services. The IA will respond within …”
Security Assistance Management Manual, as of 26 September 2026
SAMM C5.5.1: Definition.
“P&As are prepared by the Implementing Agencies (IAs) (Military Department organizations and Defense Agencies), in response to requests from a foreign government or international organization (partner) for preliminary pricing and availability for international competitions and building partner capacity. Furnishing of this information does not constitute a commitment for the USG to offer for sale the articles and services for which …”
Security Assistance Management Manual, as of 11 September 2026
SAMM C5.5.2: Price and Availability Responses.
“P&A responses are estimates of cost and availability of defense articles or services. P&A responses are not valid for use in preparing a Letter of Offer and Acceptance (LOA). The data compiled for an LOA is referred to as LOA data (LOAD). For all partner requests for LORs for P&A, except for Building Partner Capacity (BPC) (see Section C15.2.8.) and …”
Security Assistance Management Manual, as of 26 October 2026